15
Aim the camera at the subject, then press the shutter release
button. The flash discharges automatically depending on the
brightness.
Frame the subject using the focus frame on the display.
Press the w/x button to change the captured area.
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in
focus.
Press the shutter release button
fully.
The picture is taken.
2
1
2
2
Widens the area that
is captured by the
camera
Enlarges the
subject
2
3
F4.6
1/250
38
2
4
Taking Pictures
3
3
OptioW90_QSG_ENG.book Page 15 Wednesday, February 24, 2010 10:48 AM
To Next Page
Loading...
