6
• The temperature range in which the camera can be used is -10°C to
40°C (14°F to 104°F).
• The display will become black at high temperatures but will return to
normal at normal temperatures.
• The response speed of the display becomes slow at low temperatures.
This is due to the properties of the liquid crystal and is not a
malfunction.
• If the camera is subjected to rapid temperature changes, condensation
may form on the inside and outside of the camera. Therefore put the
camera in a bag or plastic bag and take it out when the difference in
temperature has subsided.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or
salt. These could cause the camera to breakdown. Wipe the camera to
dry off any rain or water drops.
• Do not press the display with excessive force. This could cause it to
break or malfunction.
• Be careful not to sit down with the camera in your back pocket as this
may damage the exterior of the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the
screw in the tripod socket on the camera.
• Do not clean the camera with organic solvents such as thinner, alcohol
or benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use
a spray blower for cleaning as it may damage the lens.
• Avoid storing the camera where pesticides and chemicals are handled.
Remove the camera from its case and store it in a well-ventilated place
to prevent the camera from becoming moldy during storage.
• Avoid using or storing the camera where it may be exposed to static
electricity or electrical interference.
Cleaning Your Camera
Storing Your Camera
To Next Page
Loading...
Need help?
General
