Pentax Zoom 280-P User Manual

CONSECUTIVE PHOTOGRAPHY
Notes on the self-timer shooting
• To cancel the self-timer at any time after it‘s
been activated, push the main switch. In
this Instance, the power will not be turned
off.
• When you want to use the flash with the
self-timer, ensure that the red lamp is lit
indicating the flash has been charged be¬
fore operating the self-timer,
• If the batteries are exhausted, the self-timer
operation may not be completed once
started. In this case, replace the batteries.
• When the Bulb mode is used in combina¬
tion with the self-timer, a shutter speed of
approx. 1/2 sec. is automatically selected.
Depress the
drive button
until the Qi)
symbol appears
on the LCD
panel. While the
shutter release button is held down, a frame
is shot every 1.6 sec. The camera focuses on
the subjects frame by frame in this mode, so
make sure to keep the autofocus frame on the
subject.
• When using flash in this mode, consecutive
shooting is possible only after the flash is
charged (the red lamp is lit) following each
exposure.
• Consecutive shooting mode does not work
in the Bulb mode: use the Bulb-Timer mode
if you wish to take consecutive pictures in
the Bulb mode.
23

Pentax Zoom 280-P Specifications

General

Brand	Pentax
Model	Zoom 280-P
Category	Digital Camera
Language	English