Pentax Zoom 280-P User Manual

Symptoms
4. T he Remote Control does not op¬
erate.
5. The flash discharges, though it is
not daric__
6. The (H) or (u) mark is displayed
on the LCD panel.
Causes an d Remedies _ |
• The operable distance of the Remote Control is approx. 5m
from the front and approx. 0.7m from the back of the camera.
• The Remote Control may not operate in a backlit situation.
<See page 36.) ____
• The flash discharges automatically in a backlit situation. {See
page 13.) ____
• If either mark disappears when the zoom lever is moved, the
camera is ready for use. The camera may be defective if either
mark appear s often. _
• If the picture is taken in the panoramic format, the data is im¬
printed on the film but is not printed on the picture._
The correct camera-to-subject distances when shooting using fiash with films other than ISO 100, 200 or
400 are indicated in the table below.
Lens'*'^ ' ^^I
28mm ( ♦♦ ♦ ) 0.56-2.5m
80mm ( ♦ ) _ 0.56-1.3m
0.56-3.5m
0.56-1.9m
1.4(*)-16m
0.65-8.4m
1.7(*)-20m
2.5(»)-28m
0.8{*M1.6m
.t. _ TTt _
1.1(*)-15m
45

Pentax Zoom 280-P Specifications

General

Brand	Pentax
Model	Zoom 280-P
Category	Digital Camera
Language	English