peplink 580 - Page 161

To Next Page

To Previous Page

USER MANUAL

Peplink Balance Series

• LAN/WAN

If LAN/WAN is chosen, a WAN Connection Access Settings form will be displayed.

WAN Connection Access Settings

Allowed Source IP

Subnets

This field allows you to restrict web admin access only from defined IP subnets.

• Any - Allow web admin accesses to be from anywhere, without IP address

restriction.

• Allow access from the following IP subnets only - Restrict web admin access

only from the defined IP subnets. When this is chosen, a text input area will be

displayed beneath:

The allowed IP subnet addresses should be entered into this text area. Each IP subnet

must be in form of w.x.y.z/m

Wherew.x.y.z is an IP address (e.g. 192.168.0.0), and

m is the subnet mask in CIDR format, which is between 0 and 32 inclusively. For example:

192.168.0.0/24

To define multiple subnets, separate each IP subnet one in a line.

For example:

192.168.0.0/24

10.8.0.0/16

Allowed WAN IP

Address(es)

This is to choose which WAN IP address(es) the web server should listen on.

Related product manuals