peplink B One Series - Page 116

Note
To utilize the Outbound Firewall Rule to block the Peplink device from contacting InControl 2. may refer to the link
below:
https://forum.peplink.com/t/faq-prevent-device-reaching-incontrol-2./63f48fdfd466df34ab475f55/
Click Add Rule to display the following screen:
Inbound Firewall Rules
Inbound firewall settings are located at Advanced > Firewall > Access Rules.
Click Add Rule to display the following screen:
https://www.peplink.com
116
Copyright @ 2024 Peplink