peplink B One Series - RADIUS Server

19.2 RADIUS Server
RADIUS Server settings are located at Advanced > Misc. Settings > RADIUS Server.
To configure the Authentication Server and Accounting Server, click New Profile to display the
following screen:
Authentication Server
Name
This field is for specifying a name to represent this profile.
Host
Specifies the IP address or hostname of the RADIUS server host.
Port
This setting specifies the UDP destination port for authentication requests. By
default, the port number is 1812.
Secret
This field is for entering the secret key for communicating to the RADIUS server.
https://www.peplink.com
139
Copyright @ 2024 Peplink