peplink B One Series User Manual

3.3 Per-User Bandwidth Control
With per-user bandwidth control, you can define bandwidth control policies for up to 3 groups of
users to prevent network congestion. Define groups by IP address and subnet, and set
bandwidth limits for every user in the group.
3.4 High Availability via VRRP
When your organization has a corporate requirement demanding the highest availability with no
single point of failure, you can deploy two Peplink routers in High Availability mode. With High
Availability mode, the second device will take over when needed.
https://www.peplink.com
15
Copyright @ 2024 Peplink

peplink B One Series Specifications

General

Brand	peplink
Model	B One Series
Category	Network Router
Language	English