the unit’s serial number.
Admin User Name is set as admin by default, but can be changed, if desired.
This field allows you to specify a new administrator password.
This field allows you to verify and confirm the new administrator password.
Read-only User Name is set as user by default, but can be changed, if desired.
This field allows you to specify a new user password. Once the user password is
set, the read-only user feature will be enabled.
This field allows you to verify and confirm the new user password.
This field specifies the number of hours and minutes that a web session can
remain idle before the Pepwave router terminates its access to the web admin
interface. By default, it is set to 4 hours.
With this box is checked, the web admin will authenticate using an external
RADIUS server. Authenticated users are treated as either "admin" with full
read-write permission or “user” with read-only access. Local admin and user
accounts will be disabled. When the device is not able to communicate with the
external RADIUS server, local accounts will be enabled again for emergency
access. Additional authentication options will be available once this box is
checked.
Available options:
● Local Account
● RADIUS
This specifies the authentication protocol used.
To Next Page
Loading...
Need help?
General
