25.3 Client List
The client list table is located at Status > Client List. It lists DHCP and online client IP
addresses, names (retrieved from the DHCP reservation table or defined by users), current
download and upload rate, and MAC address.
Clients can be imported into the DHCP reservation table by clicking the button on the
right. You can update the record after import by going to Network > LAN.
If the PPTP server (see Section 19.2), SpeedFusion
TM
(see Section 12.1), or AP controller (see
Section 20) is enabled, you may see the corresponding connection name listed in the Name
field.
In the client list table, there is a “Ban Client” feature which is used to disconnect the Wi-Fi and
Remote User Access clients by clicking the button on the right.
There is a blocklist on the same page after you banned the Wi-Fi or Remote User Access
clients.
To Next Page
Loading...
Need help?
General
