After successful login, the Dashboard of the web admin interface will be displayed.
The Dashboard shows current WAN, LAN, and Wi-Fi AP statuses. Here, you can change WAN
connection priority and switch on/off the Wi-Fi AP. For further information on setting up these
connections, please refer to Sections 8 and 9.
Device Information displays details about the device, including model name, firmware version,
and uptime. For further information, please refer to Section 22.
Configuration changes (e.g. WAN, LAN, admin settings, etc.) will take effect only after clicking the
Save button at the bottom of each page. The Apply Changes button causes the changes to be saved
and applied.
To Next Page
Loading...
Need help?
General
