This setting specifies the name of the outbound traffic rule.
This setting specifies whether the outbound traffic rule takes effect. When Enable is
checked, the rule takes effect: traffic is matched and actions are taken by the Pepwave
router based on the other parameters of the rule. When Enable is unchecked, the rule does
not take effect: the Pepwave router disregards the other parameters of the rule.
Click the drop-down menu next to the checkbox to apply a time schedule to this custom
rule.
This setting specifies the source IP Address, IP Network, MAC Address or Grouped
Network for traffic that matches the rule.
This setting specifies the destination IP address, IP network, Domain name, SpeedFusion
Cloud, SpeedFusion VPN Profile or Grouped network for traffic that matches the rule.
To Next Page
Loading...
Need help?
General
