Pepperl+Fuchs BTC22 Series - Changing Serial Interface Mode (RS-232, RS-485)

49 pages

To Next Page

To Previous Page

BTC22-*

BIOS Settings

2023-11

5.2 Changing Serial Interface Mode (RS-232, RS-485)

Select Advanced from the BIOS setup page.

Figure 5.3 "Advanced" BIOS menu

Configuring Advanced Settings

Super IO Configuration allows you to view and configure the Super I/O Chip parameters.

1. Select "Serial Port 1 Configuration". Press ENTER.

2. Select Enabled or Disabled. Press ENTER in the pop-up window.

3. Select the desired serial mode.

Figure 5.4 Select mode