Pepperl+Fuchs BTC22 Series - Resetting the BIOS to Factory Settings; Secure Boot

BTC22-*
BIOS Settings
2023-11
43
7. Select "Save and exit" or press the F10 key.
5.5 Resetting the BIOS to Factory Settings
Restoring Default Settings
You can restore the system using the following instructions.
1. Use the arrow keys to select Restore Defaults. Press ENTER.
2. Select Yes. Press ENTER to load the optimized default settings.
3. Select No to exit the process.
Restoring the Factory Settings with F9
1. Press F9: Optimized Defaults. Press ENTER.
2. Select Yes. Press ENTER to load the optimized default settings.
3. Select No to exit the process.
5.6 Secure Boot
Secure Boot
1. Go to "Security" tab to enable Secure Boot.
Figure 5.13
Note
Secure Boot is enabled by default.