BTC22-*
BIOS Settings
2023-11
39
5.4 Boot Configuration
Select Boot from the BIOS setup page.
Figure 5.6 "Boot" BIOS menu
You can change the following settings on the "Boot" configuration page:
• Setup Prompt Timeout: Sets the time period within which the Delete key must be pressed
to enter the BIOS at power-on.
• BootUp NumLock State: Enables and disables the numeric keys on the keyboard.
Set the PXE-ROM before changing boot options.
Enabling Boot via LAN (PXE)
1. Select the "Advanced" tab.
2. Select Network Stack Configuration with the arrow keys and press ENTER.
Figure 5.7 Configuring the compatibility support module
To Next Page
Loading...