Pepperl+Fuchs IDM-Z1-264-M-2D-J1-BT-N-N0 - Page 23

IDM-Z1-264-M-2D-J1-BT-N-N0, IDM-Z1-164-M-1D-J1-BT-P-N0
Commissioning
2022-12
23
The blue base connection cable is delivered pre-assembled with the supply module SK-IDM-
Z1-*. The cable consists of a M12 connector plug and a 3-core cable. The individual cores are
numbered (printed on the core insulation) and must be connected as follows (4.2 RS-232 inter-
face and 4.3 USB interface) to the intrinsically safe terminals of the supply module.
Figure 5.13 Terminal blocks in the terminal compartment
Figure 5.14 Intrinsically safe terminal compartment of the supply module after removing the
connector connection cores