IDM-Z1-264-M-2D-J1-BT-N-N0, IDM-Z1-164-M-1D-J1-BT-P-N0
Commissioning
2022-12
25
5.4 Base connection line USB
Base connection cable USB
Connection of USB connection cable to supply module
Direct connection of the base station without plug/coupling to the
supply module with USB interface
Figure 5.16 RJ50 plug - connection layout
Base station cordset
Pinout of connector plug
Pin Designation
3 D+
2 D-
4 GND
1 +UB
Pre-assembled connection coupling Terminal compartment
Pin Core Designation Number
3 3 D+ X9
2 4 D- X10
PE X11
4 2 GND X12
1 1 +UB X13
Cordset assignment Supply module terminal compartment
RJ45 pinout Strand color Designation Assignment
2 Green D+2SL X9
10 White D-2SL X10
X11
4 Black GND X12
7 Brown +UB X13
Note
Information relating to programming from the SICK AG manual (www.SICK.com) is required for
the complete commissioning of the handheld scanner.
To Next Page
Loading...