IDM-Z1-264-M-2D-J1-BT-N-N0, IDM-Z1-164-M-1D-J1-BT-P-N0
Accessories
2022-12
29
#548349 CBL-IDMx61-B-
J1-S-S18-N0
Serial connection cable for
base station
Ex-protection: suitable for
Zone 1/21 & Zone 2/22
Interface: RJ50 (cradle) to
M12 male connector
Cable: straight; 1.8-m
length
Protocol: serial
Compatible with IDM-Zx-
x64-B-J1-* base station
Straight
1,8-m length
#548350 CBL-IDMx61-B-
J1-S-C38-N0
Serial connection cable for
base station
Ex-protection: suitable for
Zone 1/21 & Zone 2/22
Interface: RJ50 (cradle) to
M12 male connector
Cable: coiled; 3.8-m length
Protocol: serial
Compatible with IDM-Zx-
x64-B-J1-* base station
Coiled
3,8-m length
#548351 CBL-IDMx61-B-
J1-U-S18-N0
USB connection cable for
base station
Ex-protection: suitable for
Zone 1/21 & Zone 2/22
Interface: RJ50 (cradle) to
M12 male connector
Cable: straight; 1.8-m
length
Protocol: USB
Compatible withIDM-Zx-
x64-B-J1-* base station
Straight
1,8-m length
#548352 CBL-IDMx61-B-
J1-U-C38-N0
USB connection cable for
base station
Ex-protection: suitable for
Zone 1/21 & Zone 2/22
Interface: RJ50 (cradle) to
M12 male connector
Cable: coiled; 3.8-m length
Protocol: USB
Compatible with IDM-Zx-
x64-B-J1-* base station
Coiled
3,8-m length
#548376 DATL-IDM-DB-S-
XX00-N0
Connector cable for wired
1D Scanner IDM-Z1-164-
D-1D-J1-SU-P-N0 (S3-
Interface required) and 2D
Scanner IDM-Z1-264-D-
2D-J1-S1-N-N0 (S4-inter-
face required) compatible
with Housing AG-XX00-*
and AG1
- 4-wire with ferrules
- IDM Scanner connection
via M12-connector
- Note: Supports only RS-
232 Scanner/Basestation
1,0-m length
Item Num-
ber
Product Name Description Cable Photo
To Next Page
Loading...