Functional Safety KFD2-UT2-(Ex)*(-1)
Product Description
2019-10
7
2 Product Description
2.1 Function
KFD2-UT2-*(-1)
This signal conditioner provides the galvanic isolation between field circuits and
control circuits.
The device converts the signal of a resistance thermometer, thermocouple, or potentiometer
to a proportional output current.
The device can also be configured as a signal splitter.
The removable terminal block K-CJC-** is available as an accessory for internal cold junction
compensation of thermocouples.
A fault is signalized by LEDs and a separate collective error message output.
The device is easily configured by the use of the PACTware configuration software.
The device is mounted on a 35 mm DIN mounting rail according to EN 60715.
KFD2-UT2-*-1
The device converts the signal of a resistance thermometer, thermocouple, or potentiometer
to a proportional output voltage.
KFD2-UT2-Ex*(-1)
This isolated barrier is used for intrinsic safety applications.
The device converts the signal of a resistance thermometer, thermocouple, or potentiometer
to a proportional output current.
The device can also be configured as a signal splitter.
The removable terminal block K-CJC-** is available as an accessory for internal cold junction
compensation of thermocouples.
A fault is signalized by LEDs and a separate collective error message output.
The device is easily configured by the use of the PACTware configuration software.
The device is mounted on a 35 mm DIN mounting rail according to EN 60715.
KFD2-UT2-Ex*-1
The device converts the signal of a resistance thermometer, thermocouple, or potentiometer
to a proportional output voltage.
To Next Page
Loading...
Need help?
General
