2016-03
26
Z-System – Zener Barriers
Technical Specifications
6.2 Technical Data
Mechanical Specifications
Mounting
Snap-on 35 mm DIN mounting rail according to EN 60715
Housing Material
Polycarbonate (PC)
Dimensions
Dimension drawings refer to chapter Dimensions.
Degree of Protection
IP20 according to EN 60529
Connection
• Screw terminals for leads of up to a max. of 2 x 2.5 mm
2
(2 x 14 AWG)
• Observe the tightening torque of the terminal screws. The tightening torque is
0.5 Nm to 0.6 Nm.
Ambient Conditions
Ambient Temperature
-20 °Cto60°C (-4 °F to 140 °F)
Storage Temperature
-25 °Cto70°C (-13 °F to 158 °F)
Relative Humidity
max. 75 % without moisture condensation
To Next Page