Admin Settings
The
Admin Settings
section allows you to set up your access point’s name, password, security
settings, and other options
Admin Settings
Device Name
This field allows you to define a name for this Pepwave router. By default,
Router Name
is set as
surf-soho-XXXX
, where
XXXX
refers to the last 4 digits of the unit’s serial number.
Admin User
Name
Admin User Name
is set as
admin
by default, but can be changed, if desired.
Admin
Password
This field allows you to specify a new administrator password.
Confirm Admin
Password
This field allows you to verify and confirm the new administrator password.
Read-only User
Name
Read-only User Name
is set as
user
by default, but can be changed, if desired.
User Password
This field allows you to specify a new user password. Once the user password is set, the read-only
user feature will be enabled.
Confirm User
Password
This field allows you to verify and confirm the new user password.
To Next Page
Loading...
