Pepwave Surf SOHO - Page 124

Email Notification Setup
Connection
Security
This setting specifies via a drop-down menu one of the following valid
connection security:
None
STARTTLS
SSL/TTS
When connection security is selected, SMTP Port will set a default port
number automatically.
SMTP Port This field is for specifying the SMTP port number. By default, this is set to
25 ; when STARTTLS is selected, the default port number will be set to 587 .
When SSL/TTS is selected, the default port number will be set to 465 . You
may customize the port number by editing this field.
SMTP User
Name /
Password
This setting specifies the SMTP username and password while sending
email. These options are shown only if Require authentication is checked
in the SMTP Server setting.
Confirm SMTP
Password
This field allows you to verify and confirm the new administrator password.
Sender’s Email
Address
This setting specifies the email address the Pepwave router will use to send
reports.
Recipient’s
Email Address
This setting specifies the email address(es) to which the Pepwave router
will send email notifications. For multiple recipients, separate each email
using the enter key.
After you have finished setting up email notifications, you can click the Test Email Notification
button to test the settings before saving. After Test Email Notification is clicked, you will see this
screen to confirm the settings:
Click Send Test Notification to confirm. In a few seconds, you will see a message with detailed
test results.