The test can be run again once it’s complete by clicking the
Start
button or you can click
Close
and change the parameters for the test.
Ch. 21 Status
Device (https://manual.peplink.com/documentation/pepwave-surf-soho-user-manual/ch-20-
status/device/)
Active Sessions (https://manual.peplink.com/documentation/pepwave-surf-soho-user-
manual/ch-20-status/active-sessions/)
Client List (https://manual.peplink.com/documentation/pepwave-surf-soho-user-manual/ch-
20-status/client-list/)
OSPF & RIPv2 (https://manual.peplink.com/documentation/pepwave-surf-soho-user-
manual/ch-20-status/ospf-ripv2/)
BGP (https://manual.peplink.com/documentation/pepwave-surf-soho-user-manual/ch-20-
status/bgp/)
PepVPN Status (https://manual.peplink.com/documentation/pepwave-surf-soho-user-
manual/ch-20-status/pepvpn-status/)
To Next Page
Loading...
