Check the box Enable to enable the Drop-in Mode. After enabling this feature and selecting the
WAN for Drop-in mode, various settings including the WAN’s connection method and IP address
will be automatically updated.
When drop-in mode is enabled, the LAN and the WAN for drop-in mode ports will be bridged.
Traffic between the LAN hosts and WAN router will be forwarded between the devices. In this
case, the hosts on both sides will not notice any IP or MAC address changes.
After successfully setting up the Surf SOHO as part of the network using drop-in mode, it will,
depending on model, support one or more WAN connections. Some SOHO units also support
multiple WAN connections after activating drop-in mode, though a SpeedFusion license may be
required to activate more than one WAN port.
Please note the Drop-In Mode is mutually exclusive with VLAN.
To Next Page
Loading...
