Health Check
Interval
This number specifies the period between each health check.
Health Check
Retries
This number specified the number of health check attempts the router will
make. Upon reaching this number, the link will be considered as failed
Recovery
Retries
This specified the number of successful health checks a failed links needs
before the link is considered as up again.
WAN > Bandwidth Allowance Monitor
The Bandwidth Allowance Monitor helps to keep track of your network usage.
To enable this function, connect to the Web Admin Interface and go to
Network > WAN.
Check the box
Enable
next to Bandwidth Allowance Monitor and you can see the following:
Bandwidth Allowance Monitor
Action
If the feature
Email Notification
is enabled, you will be notified through email
when usage hits 75% and 95% of the monthly allowance.
If the box
Disconnect when usage hits 100% of monthly allowance
is
checked, this WAN connection will be disconnected automatically when the
usage hits the monthly allowance. It will not resume connection unless this
option has been turned off or the usage has been reset when a new billing
cycle starts.
Start Day
This option allows you to define which day in the month each billing cycle
begins.
To Next Page
Loading...
