Channel Selection
Determine whether the channel will be automatically selected. If you
select custom, the following table will appear:
Output Power
Low, Medium, High, Max (boost options for tickbox).
Max is the Maximum transmit power supported for that country /
Maximum power supported of that device (the smaller value).
High, Medium, Low is having -3dBm each from the previous level.
Transmit power of 2.4Ghz is generally approximately 20dBm.
Data Rate
One of the available advanced options is the ability to configure the
Data rate according to the MCS Index (see http://mcsindex.com/
(http://mcsindex.com/))
Roaming
Checking this box will enable Wi-Fi roaming.
Roaming
Algorithm
select Normal (default) pr Advanced (enables Intensive Scan options)
Roaming Signal
Level Threshold
Configure the Roaming Signal Level Threshold in dBm
Roaming Signal
Level Gain
Configure the Roaming Signal Level Gain in dBm
Roaming Check
Interval
Configure the Roaming Check Interval in Seconds
Connect to Any
Open Mode AP
This option is to specify whether the Wi-Fi WAN will connect to any open
mode access points it finds.
Beacon Miss
Counter
Client devices will disconnect from the AP when this amount of beacons
is missed
Channel Scan
Interval
Configure Channel Scan Interval in ms.
To Next Page
Loading...
