Security
This option allows you to select which security policy is used for this wireless
network.Available options:
●
Open
Description: Security Open
Description: Security WEP
●
WPA/WPA2 – Personal
Description: Security WPA Personal
●
WPA/WPA2 – Enterprise
Description: Security WPA Enterprise
WPA3 – Personal
WPA2/WPA3 – Personal
802.1x with dynamic WEP key
Preferred
BSSID
Configure the BSSID; the BSSID is the MAC address of the wireless access
point (WAP)
Connection
Method
Choose DHCP or Static IP
DNS servers
Configure the DNS servers that this WAN connection should use
WAN > Signal threshold settings
If signal threshold is defined, this connection will be treated as down when a weaker than
threshold signal is determined.
The signal threshold can also be configured using values (this option can be enabled after
selecting the question mark)
To Next Page
Loading...
