Bandwidth Control
This section is to define how much minimum bandwidth will be reserved to each user group when
a WAN connection is
in full load
. When this feature is enabled,a slider with two indicators will be
shown.You can move the indicators to adjust each group’s weighting. The lower part of the table
shows the corresponding reserved download and uploads bandwidth value of each connection.
By default,
50%
of bandwidth has been reserved for Manager,
30%
for Staff, and
20%
for Guest.
The default download and upload limits are set to unlimited (set as
0
). This can be changed as
necessary to restrict the speeds to individual devices connected to the router, either wired or
wireless. Note, this limit is applied to all devices.
Application Queue
This section is to define the QoS Application Queue. You can set guaranteed bandwidth for a
queue and assign it to applications.
Click the Add button to create the QoS Application Queue.
To Next Page
Loading...
