To utilize the Outbound Firewall Rule to block the Peplink device from contacting InControl 2.
may refer to the link below:
https://forum.peplink.com/t/faq-prevent-device-reaching-incontrol-
2./63f48fdfd466df34ab475f55/ (https://forum.peplink.com/t/faq-prevent-device-reaching-
incontrol-2./63f48fdfd466df34ab475f55/)
Click
Add Rule
to display the following screen:
Inbound Firewall Rules
Inbound firewall settings are located at
Advanced > Firewall > Access Rules
.
Click
Add Rule
to display the following screen:
To Next Page
Loading...
