UDP Relay
You may define the UDP reply by clicking the
Advanced
>
Misc Setting
>
UDP Relay
. You can click
to enable the UPD Broadcast or Multicast traffic for LAN/VLAN/SpeedFusion VPN.
Click “
New UDP Relay Rule
” to define the relay rule.
UDP Relay
Name
This field is for specifying a name to represent this profile.
Port
This feid is to enter the specific port number for the UDP relay
Multicast
If Multicast is not selected, it will broadcast relay rule. If Multicast is
selected, you may need to enter a valid multicast address.
To Next Page
Loading...
