The temperature probe is made of braided stainless but avoid exposing
the thermocouple wires to direct flame this can damage the probe. You
can order replacement probes from www.Bbqblowers.com Your BBQ
Blower temperature probe should always be placed so that it is not in a
direct line with the fire. For best practice, chose a location near the top of
your BBQ pit close to the existing temperature gauge. Using a 3/8” drill bit,
drill a hole in the desired location on your BBQ pit.
If you need a longer probe can buy a 3 foot extension at
www.bbqblower.com
.
NOTE – you can place the temperature probe under the lid of the BBQ pit on the
cooking grate, be careful not to damage the wire of the temperature probe. If
your Temperature wire is pinched or broken the Automatic function will not work
properly
8. Care and maintenance of The Perfect Draft BBQ Blower
To Next Page
Loading...