4. Operating your BBQ Blower
When starting your BBQ fire add your desired charcoal and wood and light it. Next
attach your BBQ Blower and put the switch on manual operation to help regulate the
airflow to get the fire going. Once you have a good fire, start adjusting your stack damper
(Lid) slightly towards the closed position until your temperature starts to lower.
Note: Do not closed your stack completely
Attach the Perfect Draft BBQ Blower
Open the stack damper 100% when starting your fire
Close stack damper 50% - 60% for medium to high temperature smoking
Close stack damper 75% - 85% for low temperature smoking
If the BBQ Blower has trouble maintaining the temperature adjust the
stack exhaust as needed.
CAUTION:
Always connect the Heat Shield to the BBQ Blower while it’s connected to the fire
box failure to do so can result in damage to the outer shell of the Blower. If the BBQ
Pit temperature exceeds 400 degrees disconnect the BBQ Blower until the
temperature drops below 400 degrees.
5. Controlling the BBQ Blower in Automatic mode
To Next Page
Loading...