PERFECTPRO ROCKBOX - Loudness; Language Setting; Software Version

LOUDNESS
The Loudness function enables to get compensation on lower and higher frequency.
The effect will be more audible when the radio is in a lower volume level (Dynamic
Loudness).
1. Press the Loudness button to enable the loudness, the display shows “Loudness
On”.
2. Press the Loudness button again to disable the loudness, the display shows
“Loudness Off”.
LANGUAGE SETTING
The radio can be congured to a different language.
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, and then rotate the Tuning knob until the display shows
“System”.
3. Press the Tuning knob; rotate the Tuning knob until the display shows “Language”.
4. Press the Tuning knob to enter the language adjustment menu.
5. Rotate the Tuning knob until the desired language appears on the display (default
is English).
6. Press the Tuning knob to conrm your choice. The display will change to the
chosen language.
SOFTWARE VERSION
The software display cannot be altered and is just for your reference. You can only view
the software version in DAB and FM mode.
1. Press the On/Off button to switch on the radio.
2. Press the Source button to select FM or DAB mode.
3. Press the Menu button until the display shows “Full Scan” , and then rotate the
Tuning knob until the display shows “System”.
4. Press the Tuning knob; rotate the Tuning knob until the display shows “SW
version”.
5. Press the Tuning knob to view the software version.
6. Press the Tuning knob again to return to the normal radio display.
Notes: USB socket inside battery compartment is for upgrading the software of the
device.
13