EasyManua.ls Logo

PERFECTPRO ROCKPRO - Setting the Clock; Time Format

PERFECTPRO ROCKPRO
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
SETTING THE CLOCK
The clock can be set when the radio is in standby mode. If no buttons are pressed for 5
seconds, the radio will exit the clock setup and the setting is cancelled.
The clock can be set in system menu. If no buttons are pressed for 30 seconds, the
radio will exit the clock setup and the setting is cancelled.
1. Press the
ON/OFF button
to switch on the radio.
2. Press the
MENU button
to display current menu.
3. Rotate the
TUNING/SEEK/SELECT knob
to select “System settings” and press the
knob to enter system menu.
4. Then “Equaliser” will be displayed, rotate the
TUNING/SEEK/SELECT knob
to
select“Time/Date”andpresstheknobtoconrm.
5. Select “Set Time/Date” and press the knob again to enter date time settings.
6. Press the
TUNING/SEEK/SELECT knob
toconrm,thedayashesonthedisplay.
7. Rotate the
TUNING/SEEK/SELECT knob
to set the current day.
8. Press the
TUNING/SEEK/SELECT knob
toconrm,themonthashes.
9. Rotate the
TUNING/SEEK/SELECT knob
to set the current month.
10. Press the
TUNING/SEEK/SELECT knob
toconrm,theyearwillthenashonthe
display.
11. Rotate the
TUNING/SEEK/SELECT knob
to set the current year.
12. Rotate the
TUNING/SEEK/SELECT knob
to set the hour.
13. Press the
TUNING/SEEK/SELECT knob
toconrm,theminutedigitsash.
14. Rotate the
TUNING/SEEK/SELECT knob
to set the minute.
15. Press the
TUNING/SEEK/SELECT knob
toconrmandnishtheclocksetting.
Time format
The time format can be select and set to either 12-hour or 24-hour format.
1. Press the
ON/OFF button
to switch on the radio.
2. Press the
Menu button
to display current menu.
3. Rotate the
TUNING/SEEK/SELECT knob
to select “System settings” and press the
knob to enter system menu.
4. Then “Equaliser” will be displayed, rotate the
TUNING/SEEK/SELECT knob
to
select“Time/Date”andpresstheknobtoconrm.
5. Rotate the
TUNING/SEEK/SELECT knob
to select “12/24-hour format” and press
the knob.
6. Rotate the
TUNING/SEEK/SELECT knob
to select “12” or “24” hour format, then
presstheknobagaintoconrmandnishthesetting.
18

Table of Contents

Related product manuals