PERFECTPRO ROCKPRO - Warranty and Technical Information; Product Warranty Details

GB
LANGUAGE
Theradiocanbeconguredtoadifferentlanguage.
1. Press the
ON/OFF button
to turn on the radio.
2. Press the
MENU button
, and then rotate the
TUNING/SEEK/SELECT knob
to
“System settings”.
3. Press the
TUNING/SEEK/SELECT knob
; rotate the
TUNING/SEEK/SELECT knob
to “Language”.
4. Press the
TUNING/SEEK/SELECT knob
to enter the language adjustment menu.
5. Rotate the
TUNING/SEEK/SELECT knob
to select the desired language (default is
English).
6. Press the
TUNING/SEEK/SELECT knob
toconrmyourchoice.Thedisplaywill
change to the chosen language.
SOFTWARE VERSION
The software display cannot be altered and is just for your reference. You can only view
the software version in DAB, FM, Bluetooth, Aux In or USB mode.
1. Press the
ON/OFF button
to switch on the radio.
2. Press the
SOURCE button
to select any of the modes.
3. Press the
MENU button
; rotate the
TUNING/SEEK/SELECT knob
to “System
settings”.
4. Press the
TUNING/SEEK/SELECT knob
; rotate the
TUNING/SEEK/SELECT knob
to “Info”.
5. Press the
TUNING/SEEK/SELECT knob
to view the software version.
6. Press the
MENU button
back to the last menu, and press the
MENU button
again
to return to the normal radio display.
SYSTEM RESET
If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the
ON/OFF button
to switch on the radio.
2. Press the
MENU button
;
3. Then, rotate the
TUNING/SEEK/SELECT knob
to the “System settings”. Press the
TUNING/SEEK/SELECT knob
.
4. Rotate the
TUNING/SEEK/SELECT knob
to the “Factory reset”. Press the
TUNING/SEEK/SELECT knob
.
5. Rotate the
TUNING/SEEK/SELECT knob
to select between “Yes” or “No”.
Select “Yes” if you wish to reset the radio, otherwise, select “No”.
6. Press the
TUNING/SEEK/SELECT knob
to cause the factory reset.
7. A full reset will be performed. All presets and the station list will be erased. All
settings will be set to the default values.
The display will the Perfect Pro logo for a few seconds, and then the radio will
automatically perform an auto scan of the Band III DAB channels and the FM band.
20