EasyManua.ls Logo

PERFECTPRO ROCKPRO - Secondary Services; Selecting a Station; Operating the Radio; Dab Mode

PERFECTPRO ROCKPRO
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USING THE DEVICE FOR THE FIRST TIME
1. Placetheradioonaatsurface.
2. Carefully extend the antenna located on the top of the radio. Adjust the antenna so
it is vertically extending above the radio.
3. Plugging the AC power cord into the AC socket. The radio will start up and
the display will show the Perfect Pro logo for a few seconds. Then the radio will
automatically perform an auto scan of the Band III DAB channels and the FM band
in the back ground.
4. Whenthescaniscompleted,the40strongestFMstationsandtherst40DAB
stations will be stored as presets. The radio will switch to standby with the updated
clock and date showing on the display.
5. If no signals are found, the clock will not be updated. It may be necessary to
relocate the radio to a position giving better reception.
DAB MODE
Operating the radio
1. Carefully extend the antenna. Press the
ON/OFF
button
to switch on the radio.
2. Select DAB by pressing the
SOURCE button
.
3. Therststationinthelistofstationsfoundwillbeplayed.Thedisplaywillshow
the station name. If the radio has been used before, the last used station will be
selected.
4. If no DAB signals are detected, “No stations available” will be displayed. It may
be necessary to relocate the radio to a position with better reception. You should
thencarryoutanautoscantondstations,pleaserefertothesection
“Find new
stations - DAB”.
Selecting a station
1. Press the
ON/OFF button
to switch on the radio.
2. The display shows the name of the radio station currently selected.
3. Rotate the
TUNING/SEEK/SELECT knob
to show the available station list.
4. Rotate the
TUNING/SEEK/SELECT knob
toscrollthroughthelisttondthe
desired station, press the
TUNING/SEEK/SELECT knob
to select the station.
Note:
If after selecting a station the display shows “No stations available”, it may be
necessary to relocate the radio to a position with better reception.
Secondary services
1. Certain radio stations have one or more secondary services associated with them.
If a station has a secondary service associated with it, then the secondary service
will appear immediately after the primary service as you turn the
TUNING/SEEK/
SELECT knob
.
GB
8

Table of Contents

Related product manuals