Performance Tool M570C - User Manual

Heavy Duty Sandblaster Kit
Stock Number M570C
SPECIFICATIONS:
Air Pressure (PSI) ........................................ 90
Average Air Consumption (CFM) ............................. 8
Air Inlet (NPT) ........................................ 1/4 in.
Hose Size (ID) ........................................ 3/8 in.
Specifications are subject to change without notice.
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO
MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND
WILL VOID WARRANTY.
Some dust created by power sanding contains chemicals known to the State of California to cause cancer, birth defects or other reproductive
harm. An example of this type of chemical is lead from lead based paints, Crystalline Silica from bricks and cement or other masonry, Arsenic
and Chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure: work in a well ventilated area and work with approved safety equipment, such as dusk masks that are specially designed
to filter out microscopic particles.
OWNER’S MANUAL

Summary

Important Safety Information

General Workspace and Personal Safety

Covers workspace cleanliness, avoiding hazardous conditions, and keeping children away.

Operational Safety Precautions

Includes wearing safety glasses, maintaining balance, and safe connection/disconnection procedures.

Pre-Use Checks and Repair Safety

Guidelines for checking parts for damage and ensuring repairs are done by qualified technicians.

Operation

Assembly Procedures

Step-by-step guide on assembling the sandblaster, including hose and tube connections.

Setup and Air Supply

Details compressor placement, air supply quality, and ensuring adequate air pressure.

Troubleshooting

Addressing Insufficient Power

Performance Tool M570C Specifications