Page 2
SAFETY SYMBOLS
Some of these following symbols may be used on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and
more safely.
Symbol
Name
Designation / Explanation
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
∿
Alternating current Type of current
n
o
No-load speed Rotational speed at no load
RPM Revolutions per minute Unit of the speed
Class II construction Double insulated construction
Read the instruction
manual
To reduce the risk of injury, user must read
instruction manual
Warning symbol Never place hands near the cutting area.
WARNING:
To ensure safety and reliability, all repairs should be performed by a
qualied service technician.
To Next Page
Loading...
