Perkins 1106D-E70TA - Customer Specified Parameters

Customer Specified Parameters
Customer specified parameters allow the engine to
be configured to the exact needs of the application.
The electronic service tool is required in order to alter
the customer configuration parameters.
Customer parameters may be changed repeatedly as
operational requirements change.
Table 5
Customer Specified Parameters
Specified Parameters Record
ECM Identification Parameters
ECM Serial Number
Software Group Part Number
Software Group Release Date
Software Group Description
Selected Engine Rating
Rating Number
Speed Control
Low Idle Speed
Engine Configuration Parameters
Ether Solenoid Configuration
Engine Idle Shutdown
Minimum Ambient Air Temperature
Maximum Ambient Air Temperature
Shutdown Enable Status
Shutdown Delay Time
Ambient Temperature Override Enable Status
PTO and Throttle Lock Parameters
Throttle Lock Feature Installation Status
PTO Mode
Throttle Lock Engine Set Speed 1
Throttle Lock Engine Set Speed 2
Throttle Lock Increment Speed Ramp Rate
Throttle Lock Decrement Speed Ramp Rate
Throttle Lock Engine Set Speed Increment
Throttle Lock Engine Set Speed Decrement
Miscellaneous
Monitoring Mode Shutdowns
(continued)
42
SEBU8731-04
Operation Section
Configuration Parameters