EasyManua.ls Logo

Perkins 1106D-E70TA - Adding SCA to Heavy-Duty Coolant; Cleaning Heavy-Duty Antifreeze Systems

Perkins 1106D-E70TA
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adding the SCA to Heavy-Duty Coolant
at the Initial Fill
Use the equation that is in Table 16 to determine the
amount of SCA that is required when the cooling
system is initially filled.
Table 16
Equation For Adding The SCA To The Heavy-Duty Coolant At
The Initial Fill
V × 0.045 = X
V is the total volume of the cooling system.
X is the amount of SCA that is required.
Table 17 is an example for using the equation that is
in Table 16 .
Table 17
Example Of The Equation For Adding The SCA To The Heavy-
Duty Coolant At The Initial Fill
Total Volume of the
Cooling System (V)
Multiplication
Factor
Amount of SCA
that is Required
(X)
15 L (4 US gal) × 0.045 0.7 L (24 oz)
Adding The SCA to The Heavy-Duty
Coolant For Maintenance
Heavy-duty antifreeze of all types REQUIRE periodic
additions of an SCA.
Test the antifreeze periodically for the concentration
of SCA. For the interval, refer to the Operation and
Maintenance Manual, “Maintenance Interval
Schedule” (Maintenance Section). Cooling System
Supplemental Coolant Additive (SCA) Test/Add.
Additions of SCA are based on the results of the test.
The size of the cooling system determines the
amount of SCA that is needed.
Use the equation that is in Table 18 to determine the
amount of SCA that is required, if necessary:
Table 18
Equation For Adding The SCA To The Heavy-Duty Coolant
For Maintenance
V × 0.014 = X
V is the total volume of the cooling system.
X is the amount of SCA that is required.
Table 19 is an example for using the equation that is
in Table 18 .
Table 19
Example Of The Equation For Adding The SCA To The Heavy-
Duty Coolant For Maintenance
Total Volume of the
Cooling System (V)
Multiplication
Factor
Amount of SCA
that is Required
(X)
15 L (4 US gal) × 0.014 0.2 L (7 oz)
Cleaning the System of Heavy-Duty
Antifreeze
Clean the cooling system after used coolant is
drained or before the cooling system is filled with
new coolant.
Clean the cooling system whenever the coolant is
contaminated or whenever the coolant is foaming.
68
SEBU8731-04
Maintenance Section
Fluid Recommendations

Other manuals for Perkins 1106D-E70TA

Related product manuals