Need help?Do you have a question about the Perkins 4.248 and is the answer not in the manual?
General| Displacement | 4.248 liters |
|---|---|
| Aspiration | Naturally aspirated |
| Fuel System | Direct injection |
| Compression Ratio | 16:1 |
| Configuration | Inline 4 cylinder |
| Stroke | 127 mm |
| Cooling System | Liquid-cooled |
| Power Output | 54-82 hp (40-61 kW) |
Specific safety warning regarding asbestos materials in engine components.
Performance specifications for various engine models (4.248, T4.236, T4.38, 4.236, and 4.212).
Critical torque values for engine assembly and component fitting.
Specifies acceptable wear limits for engine components like valve seats and bearings.
Manufacturing dimensions and data for the engine's cylinder block.
Specifications for cast iron cylinders, including bore and dimensions.
Specifications for chrome-plated cylinder liners and their fitting.
Piston specifications and ring groove dimensions for 4.2482 engines.
Piston specifications and ring groove dimensions for T4.236 engines.
Piston specifications and ring groove dimensions for 4.236 engines.
Piston specifications and ring groove dimensions for 4.212 engines.
A chart listing common faults and their possible causes.
Explanations for the numbered items used in the fault finding chart.
Step-by-step instructions for removing the cylinder head assembly.
Procedure for removing valves from the cylinder head.
To Next Page
