Perkins 403J-E17T - Maintenance Section; Refill Capacities

i08101218
Maintenance Section
Refill Capacities
Refill Capacities
Lubrication System
Engines Equipped with a Standard Oil
Pan
The refill capacities for the engine crankcase reflect
the approximate capacity of the crankcase or sump
plus standard oil filters. Auxiliary oil filter systems will
require more oil. Refer to the OEM specifications for
the capacity of the auxiliary oil filter. Refer to the
Operation and Maintenance Manual, “Maintenance
Section” for more information on Lubricant
Specifications.
Illustration 38 g06544043
Typical example
(1) Standard Oil Pan
Table 4
403J-E17T Engine
Refill Capacities
Compartment or System
Minimum Maximum
Crankcase Oil Sump
(1)
4.8 L
(1.27 US gal)
6.3 L
(1.66 US gal)
Total Lubrication System
(2)
(continued)
(Table 4, contd)
(1)
More than one style of sump may be used on these engines.
Use these values to estimate the refill capacity. Use the engine
oil level gauge to fill the engine to the correct oil level. Record
the result in this table. These values are the approximate ca-
pacities for the Crankcase Oil Sump which includes the stand-
ard factory installed oil filters. Engines with auxiliary oil filters
will require more oil. Refer to the OEM specifications for the ca-
pacity of the auxiliary oil filter.
(2)
The Total Lubrication System includes the capacity for the
Crankcase Oil Sump plus the capacity of factory installed oil fil-
ters and other filters added to the lubrication system. Enter the
value for the capacity of the Total Lubrication System in this
row.
Table 5
404J-E22T and 404J-E22TA Engines
Refill Capacities
Compartment or System
Minimum Maximum
Crankcase Oil Sump
(1)
7.2 L
(1.90 US gal)
8.5 L
(2.25 US gal)
Total Lubrication System
(2)
(1)
More than one style of sump may be used on these engines.
Use these values to estimate the refill capacity. Use the engine
oil level gauge to fill the engine to the correct oil level. Record
the result in this table. These values are the approximate ca-
pacities for the Crankcase Oil Sump which includes the stand-
ard factory installed oil filters. Engines with auxiliary oil filters
will require more oil. Refer to the OEM specifications for the ca-
pacity of the auxiliary oil filter.
(2)
The Total Lubrication System includes the capacity for the
Crankcase Oil Sump plus the capacity of factory installed oil fil-
ters and other filters added to the lubrication system. Enter the
value for the capacity of the Total Lubrication System in this
row.
Engines Equipped with a Balancer Oil
Pan
Illustration 39 g06544060
Typical example of Industrial Engine With a Balancer
Oil Pan
(2) Oil Pan with a balancer
58 M0094137-02
Maintenance Section
Refill Capacities