Check the coolant level when the engine is stopped
and cool.
NOTICE
When any servicing or repair of the engine cooling
system is performed, the procedure must be per-
formed with the engine on level ground. This proce-
dure will allow you to check accurately the coolant
level. This procedure will also help in avoiding the risk
of introducing an air lock into the coolant system.
Remove the cooling system filler cap slowly to relieve
the pressure within the cooling system.
For the correct coolant level, refer to the OEM
information.
Factory Installed Radiators
Illustration 60 g06165264
Typical example
• The coolant level (A) is for factory installed
radiator with the three cylinder engine.
• The coolant level (B) is for factory installed
radiator with the four cylinder turbocharged
engine.
• The coolant level (C) is for factory installed
radiator with the four cylinder turbocharged
aftercooled engine.
M0094137-02 93
Maintenance Section
Coolant Level - Check
To Next Page
Loading...
