Perkins 404D-22T - Product Identification Information

i03657510
Product Identification
Information
Engine Identification
Perkins engines are identified by a serial number.
This number is shown on a serial number plate that is
mounted above the fuel injection pump on the right
hand side of the engine block.
An example of an engine number is
GP*****U000001T.
G Engine family
P Type of engine
***** The list number of the engine
U Country of manufacture
0 The first digit is a production code.
00001 Engine Serial Number
T Year of Manufacture
Perkins dealers or Perkins distributors need all of
these numbers in order to determine the components
that were included with the engine. This permits
accurate identification of replacement part numbers.
i02157258
Serial Number Plate
Illustration 26 g01094203
Typical serial number plate
The Serial Number Plate is located above the fuel
injection pump on the right side of the cylinder block.
The following information is stamped on the Serial
Number Plate: Engine serial number, Model and
Arrangement number.
i02164876
Reference Numbers
Information for the following items may be needed to
order parts. Locate the information for your engine.
Record the information in the appropriate space.
Make a copy of this list for a record. Keep the
information for future reference.
Record for Reference
Engine Model
Engine Serial number
Engine Low Idle rpm
Engine Full Load rpm
Primary Fuel Filter
Water Separator Element
Secondary Fuel Filter Element
Lubrication Oil Filter Element
Auxiliary Oil Filter Element
Total Lubrication System Capacity
Total Cooling System Capacity
Air Cleaner Element
Fan Drive Belt
SEBU8311-09
25
Product Information Section
Product Identification Information