Illustration 27 g02052934
Perkins will supply the fuel label with every engine,
refer to illustration 27 . The equipment manufacturer
must install the label to the equipment. The label must
be attached to the equipment near the inlet of the fuel
tank. This action will comply with the EPA regulations.
The equipment manufacturer may install another fuel
label . If another fuel label is used, the equipment
manufacturer must send a drawing or a photo of the
label to Perkins. This action will ensure compliance of
the label.
i05157330
Reference Information
Information for the following items may be needed to
order parts. Locate the information for your engine.
Record the information in the appropriate space.
Make a copy of this list for a record. Keep the
information for future reference.
Record for Reference
Engine Model
Engine Serial number
Engine rpm
In-Line fuel filter
Fuel Filter Element
Lubrication Oil Filter
Crankcase Breather Element
Total Lubrication System Capacity
Total Cooling System Capacity
Air Cleaner Element
Fan Belt
Belt for Air Pump
Identifying Numbers on Aftertreatment
SEBU8609 27
Product Identification Information
Reference Information
To Next Page
Loading...