Illustration 44 g06473107
Typical example
Illustration 45 g06474305
2. Loosen bolt (1) and bolt (3) on link lever (2).
3. Loosen bolt (5).
4. Rotate link lever (2) anti-clockwise to release bolt
(3) from the cut-out in Position (X).
5. Rotate alternator (4) towards the cylinder block to
remove the alternator belt. Discard the alternator
belt.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
Illustration 46 g06473107
Typical example
M0094137-02 81
Maintenance Section
Multi-V Stretch Belt
To Next Page
Loading...