Perkins M225TI User Manual

TPD1317e Contents
Perkins Sabre Marine Engines
Installation Manual
M300Ti 6 Cylinder turbocharged, intercooled, diesel engine for
pleasure boat applications
M265Ti 6 Cylinder turbocharged, intercooled, diesel engine for
pleasure boat applications
M225Ti 6 Cylinder turbocharged, intercooled, diesel engine for
pleasure boat applications
M215C 6 Cylinder turbocharged, intercooled, diesel engine for
commercial applications
M185C 6 Cylinder turbocharged, intercooled, diesel engine for
commercial applications
M135 6 Cylinder naturally aspirated, diesel engine for pleasure boat
applications
M130C 6 Cylinder naturally aspirated, diesel engine for commercial
applications
M115T 4 Cylinder turbocharged diesel engine for all applications
M92 4 Cylinder naturally aspirated diesel engine for all
applications
M92B 4 Cylinder naturally aspirated diesel engine for all
applications
Publication TPD 1317e, Issue 10
Published in May 2007 by Sabre Engines Ltd, Wimborne, Dorset, England. BH21 7PW
Tel: +44(0)1202 893720 Fax: +44(0)1202 851700 Email: post @sabre-engines.co.uk
Website: www.Perkins-Sabre.com

Perkins M225TI Specifications

General

Engine Model	M225TI
Engine Type	Diesel
Number of Cylinders	6
Power Output	225 hp
Aspiration	Turbocharged
Fuel System	Direct injection
Displacement	6.0 liters
Cooling System	Liquid-cooled
Emission Standards	EU Stage IIIA

Summary

Engine Mounting

1.1 Installation Angles

Describes permissible heel and flywheel down angles for engine installation.

1.3 Flexible Engine Mounts

Explains the purpose and advantages of flexible engine mounts for vibration reduction.

Propeller Shafts and Couplings

2.1 Propeller Shafts

Discusses flexible mountings for propeller shafts to reduce noise and vibration.

2.2 Gearbox Output Couplings

Details methods for gripping propeller shafts with gearbox couplings, including Twin Disc and Hurth.

Exhaust Systems

3.1 Wet Systems

Describes wet exhaust systems using raw water for cooling and exhaust gas cooling.

3.2 Dry Systems

Explains dry exhaust systems requiring careful design for high-temperature components in confined spaces.

Engine Cooling Systems

5.1 Raw Water Systems

Details requirements for separate sea water systems for each engine, including intake fittings and strainers.

5.3 Keel Cooling System: M225Ti, M215C and M185C Engines

Provides requirements for keel cooling systems, including heat rejection and water flow for specific engine models.

5.4 Keel Cooling System: M135 and M130C Engine

Details keel cooling system requirements for M135 and M130C engines, focusing on heat rejection and water flow.

5.5 Keel Cooling System: M115T M92 and M92B engine

Outlines keel cooling system requirements for M115T, M92, and M92B engines, including heat rejection and water flow.

Fuel Systems

6.1 Fuel Connections

Engine Electrical Systems

7.1 Engine Wiring Looms

7.2 Fuseboard

7.5 Instrument Panels

7.6 Battery and Starter Cables

7.7 Zinc Anode Bonding System

Engine Controls

8.1 M300Ti, and M265Ti Engines

8.2 M225Ti, M215C and M185C Engines

8.3 M135 and M130C Engines

8.4 M115T and M92 Engines

8.5 M92B Engines

Reference Data

11.1 M300Ti and M265Ti Engines

11.2 M225Ti, M215C and M185C Engines

11.3 M135, and M130C Engines

11.4 M115T, and M92 Engines

11.5 M92B Engines