Perkins M265TI User Manual

TPD1317e Contents
Perkins Sabre Marine Engines
Installation Manual
M300Ti 6 Cylinder turbocharged, intercooled, diesel engine for
pleasure boat applications
M265Ti 6 Cylinder turbocharged, intercooled, diesel engine for
pleasure boat applications
M225Ti 6 Cylinder turbocharged, intercooled, diesel engine for
pleasure boat applications
M215C 6 Cylinder turbocharged, intercooled, diesel engine for
commercial applications
M185C 6 Cylinder turbocharged, intercooled, diesel engine for
commercial applications
M135 6 Cylinder naturally aspirated, diesel engine for pleasure boat
applications
M130C 6 Cylinder naturally aspirated, diesel engine for commercial
applications
M115T 4 Cylinder turbocharged diesel engine for all applications
M92 4 Cylinder naturally aspirated diesel engine for all
applications
M92B 4 Cylinder naturally aspirated diesel engine for all
applications
Publication TPD 1317e, Issue 10
Published in May 2007 by Sabre Engines Ltd, Wimborne, Dorset, England. BH21 7PW
Tel: +44(0)1202 893720 Fax: +44(0)1202 851700 Email: post @sabre-engines.co.uk
Website: www.Perkins-Sabre.com

Perkins M265TI Specifications

General

Engine Model	M265TI
Compression Ratio	16.5:1
Rated Speed	2200 rpm
Fuel System	Direct injection
Bore	102 mm
Power Output	265 hp (198 kW)
Aspiration	Turbocharged
Cooling System	Liquid-cooled
Weight	Approximately 650 kg (dry)
Emissions Compliance	EU Stage IIIA / US EPA Tier 3

Summary

Chapter 1 Engine Mounting

1.1 Installation Angles

Details acceptable heel angles for 6 and 4 cylinder models.

1.2 Engine Mounting Brackets

1.3 Flexible Engine Mounts

Explains benefits and types of flexible mounts for vibration reduction.

Chapter 2 Propeller Shafts and Couplings

2.1 Propeller Shafts

Chapter 3 Exhaust Systems

3.1 Wet Systems

3.2 Dry Systems

Chapter 5 Engine Cooling Systems

5.1 Raw Water Systems

Details requirements for separate sea water systems for each engine.

5.3 Keel Cooling System: M225Ti, M215C and M185C Engines

5.4 Keel Cooling System: M135 and M130C Engine

5.5 Keel Cooling System: M115T M92 and M92B engine

Chapter 6 Fuel Systems

6.1 Fuel Connections

Discusses importance of proper connectors and thread details for fuel pipes.

Chapter 7 Engine Electrical Systems

7.1 Engine Wiring Looms

Explains the engine wiring loom connection and lists circuit diagram references.

7.2 Fuseboard

7.3 Circuit Protection. M92B only.

7.5 Instrument Panels

7.6 Battery and Starter Cables

7.7 Zinc Anode bonding system

Explains bonding for electrolytic corrosion prevention and anode system.

Chapter 8 Engine Controls

8.1 M300Ti, and M265Ti Engines

8.2 M225Ti, M215C and M185C Engines

Chapter 11 Reference Data

11.1 M300Ti and M265Ti Engines

Provides basic technical data for M300Ti and M265Ti engines.

11.2 M225Ti, M215C and M185C Engines

Lists technical data for M225Ti, M215C, and M185C engines.

11.3 M135, and M130C Engines

Presents technical specifications for M135 and M130C engines.

11.4 M115T, and M92 Engines

Details technical data for M115T and M92 engines.

11.5 M92B Engines

Provides technical specifications for the M92B engine.