Need help?Do you have a question about the Perle IOLAN DG1 TX and is the answer not in the manual?
General| Model | IOLAN DG1 TX |
|---|---|
| Connectivity Technology | Wired |
| RAM | 8 MB |
| Flash Memory | 4 MB |
| Data Bits | 5, 6, 7, 8 |
| Parity | None, Even, Odd, Mark, Space |
| Device Type | Terminal Server |
| Serial Ports | 1 |
| Network Interface | 10/100Base-TX |
| Data Link Protocol | Ethernet |
| Features | DHCP support, Syslog support |
| Power Supply | External AC adapter |
| Power | 5 V DC |
| Stop Bits | 1, 2 |
| Flow Control | RTS/CTS, DTR/DSR, Xon/Xoff |
| Connector | RJ-45 |
| Operating Temperature | 0 °C to 50 °C |
| Storage Temperature | -20°C - 70°C |
| Humidity | 5 - 95% (non-condensing) |
Introduction to the guide for network technicians.
Target audience for this guide includes network and computer technicians.
Describes hardware features, installation, and operation of the IOLAN units.
Explains text conventions and warnings used throughout the document.
Details the Gigabit Ethernet port and types of serial ports (RJ45, DB9M, DB25F).
Explains the function of the reset button and the console/serial DIP switch.
Details the state and meaning of the Power/Ready LED indicator.
Explains the Link LED indicators for network speed (10/100/1000 Mbps).
Describes the Activity LED indicator for network traffic.
Important warnings and cautions related to installation and power connection safety.
Instructions for connecting the unit to its power source via barrel connector or terminal block.
Procedure for grounding the chassis and attaching the power cord relief clip.
How to connect a serial device or console to the IOLAN.
Steps to configure the IOLAN for console port access.
How to configure the IOLAN for serial port access as a communication server.
Instructions for connecting the IOLAN to a network via the Ethernet port.
Procedure for rebooting the IOLAN using the reset button.
How to reset the IOLAN configuration to factory defaults.
Using the Command Line Interface for configuration.
Using the Web Manager interface for configuration.
Using the Windows-based Device Manager utility for configuration.
Mechanical dimensions and drawings for the RJ45 serial port model.
Mechanical dimensions and drawings for the DB9M serial port model.
Mechanical dimensions and drawings for the DB25F serial port model.
Pinout table for connecting serial devices to the IOLAN DB25F connector.
Pinout tables for DB9 male and RJ45 serial connectors.
Contact information and link for Perle Technical Assistance Center.
Information on product warranty and registration.
To Next Page
