Need help?Do you have a question about the Perle IOLAN + Rack and is the answer not in the manual?
Step-by-step instructions for physically connecting the IOLAN+ to an Ethernet network using various port types.
Setup for configuring terminal ports to automatically connect to a designated Unix host login prompt.
Port configuration details for establishing dial-in connections, including PPP, SLIP, and CSLIP setups.
Setting up IOLAN+ for authenticating users and logging connection events via a designated host.
Configuration of logging parameters to record IOLAN+ events, user activity, and connection status on an authentication host.
Port Setup Menu configuration for simple dial-in connections and PPP/SLIP/CSLIP connections.
Configuration for dial-out connections on Unix systems, including the use of the ioland utility.
Setting up routing entries on network hosts to enable IOLAN+ to act as a router for dial-out connections.
Defining remote systems for dial-out connections, including phone numbers, login scripts, and service types.
Defining and setting up modem devices, including assigning device names and configuring parameters for dial-out.
Configuring serial ports for access via a reverse telnet connection, useful for data collection devices.
Setting up all parameters associated with a port, divided into Hardware, User, Flow Control, and IP address sections.
Accessing main configuration functions, including gateway, host, line, password, port, server, and stats.
Configuring remote access sites, devices, and authentication/logging parameters for dial-out connections.
Defining main IOLAN+ system parameters, including identification, general administration, downloading, and domain naming.
Addressing situations where the IOLAN+ unit is not functioning, including port killing and power cycling.
Procedures for resetting the IOLAN+ unit to factory defaults for troubleshooting or recovery.
Steps to configure IOLAN+ ports to use the Vmodem feature for virtual modem-like communication.
General| Data Link Protocol | Ethernet |
|---|---|
| Network / Transport Protocol | TCP/IP |
| Remote Management Protocol | SNMP, Telnet, SSH, HTTP, HTTPS |
| Encryption Algorithm | SSL |
| Authentication Method | RADIUS, TACACS+, LDAP |
| Features | Port buffering, DHCP support, VLAN support |
| Compliant Standards | RoHS |
| Management | CLI |
| Operating Temperature | 0 - 50°C (32 - 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity | 10% to 90% non-condensing |
To Next Page
